Sunday, June 30, 2013

A Truck Lumber Rack Redistributes the Load and Protects Your Bed and Tailgate From Damage

If there is one single part that distinguishes a pickup truck from other vehicles, then that would certainly be the truck bed. And it is not only the most unique part of a pickup truck, it is also the most useful part.

The pickup truck is popular because it can be used to transport equipment, farm produce, lumber, and almost anything that can be loaded into it. The pickup truck bed usually accommodates the bulk of the load. That is why the bed often gets damaged from enduring heavy loads.
Benefits of a Truck Lumber Rack:

The most common complaint of pickup truck owners is damaged truck bed paint. It may be a somewhat insignificant issue, but over time, damaged truck bed paint can lead to other things. The paint is the initial barrier that protects a vehicle from the elements. So a peeled off truck bed paint can expose the truck bed to moisture that can cause it to become corrugated over time. It is really important to maintain the integrity of the truck bed's paint as it would also help in ensuring that the pickup truck's bed would last for a long time.

One great way to ensure that your truck bed would be in great condition is to install a lumber rack on your truck. This kind of rack is designed to fit on the back of the truck to provide extra space to carry tools and materials. Peeled off truck bed paint usually result from loading cumbersome materials on the bed. This can be easily prevented if you have installed a rack made specifically to haul lumber on your pickup.

Another great benefit that you can get with a lumber rack is extra storage space. Let us say that you are planning to repair a property in the countryside. There are times when your truck gets loaded up and you have to go back to your main residence to bring other equipment. It certainly is not only inconvenient, but it is also impractical. With the current state of our economy, gas has become rather expensive. So you can really save a lot from gas expenses by installing a rack and maximizing storage space on your truck.

A lumber rack can also be useful during outdoor trips. With one, you can definitely bring kayak, canoes, bikes, and other essential outdoor equipment that are needed to heighten your outdoor experience.

Types of Truck Lumber Racks:

The four main types of lumber racks are the over-bed rack, side-mount rack, and over-cab rack. Over-bed racks are the most common type and is constructed to fit over the bed of the truck.

Side-mount racks are rather small and are fastened to only one side of the truck. Over-cab racks are considered the most versatile type since it can be attached to both sides of the truck and can be extended from the end of the bed to the front of the cab to optimize storage space.
Best Truck Lumber Rack Material:

A lumber racks made of commercial grade iron are popular because of their durability. Pickup owners also love stainless steel lumber racks because of their strength and resistance to corrosion. On the other hand, aluminum racks are beloved because of their durability, resistance to rust, and affordable cost.

 By

Greg has been writing articles for over 4 years. Please visit his latest vehicle accessories and racks website, such as Headache Racks [http://www.headacheracks.net] for your pickup trucks, as well as truck lumber rack [http://www.headacheracks.net/truck-lumber-rack.html] information, as well as storage ideas for all types of vehicles.

Article Source: http://EzineArticles.com/?expert=Greg_Parsons



To find out more about Rack-It truck racks, call at 800-445-7666.
Also find them at http://rackitinc.com/

 

Wednesday, June 26, 2013

1965 Chevy Pick Up Twin Supercharged



A 1965 Chevrolet Pick Up that is running Twin Superchargers....Street legal and built to drive...you have to see it to believe it...check it out!!!....Make sure you follow me so that you don'y miss any of the cool videos I post daily!!

Apparel Provided By: http://www.etmotorgear.com
Check Them Out!!

Video note...I was at the All Chevy Super Nationals...not the Super Chevy Show...sorry for the confusion

Monday, June 24, 2013

Aluminum - A Lightweight Alternative Rack-It rack


Our aluminum Rack-it rack it only adds 75 pounds to the truck. The aluminum rack comes powder coated in silver color to set it apart from the standard black steel racks. This is one tough, heavy duty rack that can take what you dish out for years on end and still look great.

To find out more, you may call Rack-It truck racks at 800-445-7666.
Also find us at http://rackitinc.com/

Saturday, June 22, 2013

Thursday, June 20, 2013

L.A. Camper Shells - A Rack-it Dealer in Downey, CA

 

 L.A. Camper Shells and Truck Accessories has been family owned since 1994, but Luis has been in the business since 1974. His son Henry is a knowledgeable salesman and installer and has been in the business since 1986. 


Together this duo has outfitted trucks with a high level of product knowledge and commitment to excellent customer service.



We are proud to be authorized dealers for Rack-It Truck Racks, SnugTop, Leer and Vista, all proudly made in the U.S. The quality and wide selection of truck accessories is the main reason that we have a strong following of customers all over Southern California. Word of mouth by satisfied customers is our best form of advertising. So please, call, email or stop on by for your free quote, and ask for Luis, Henry or Patricia. We look forward to serving you.

LA Camper Shells
8836 Lakewood Blvd,
Downey,CA 90240

Phone: 562.923.3533
Fax: 562.923.2822

Email us at: Wlacamp48@aol.com
or patricia@lacampershells.com

Tuesday, June 18, 2013

Reduce Wind Noise From Your Rack!



Hearing noise coming from your Rack? Add the Wind Deflector Clamp On Accessory to alleviate much of the typical wind noise a rack may experience.

See your dealer, or call us at 800-445-7666 and we can ship one to you right away.

Also find us at http://rackitinc.com/

Sunday, June 16, 2013

Add the Water Jug Option For Use At The Job-site



The Water Jug Option holds most twelve inch diameter insulated water jugs, three or five gallon capacity, such as the Igloo brand shown. Fits all Rack-it truck racks. Gloss black powder coat finish. Hardware included. Your job-site crew will surely appreciate Rack-it's clamp-on water jug holder.

Call your Rack-it dealer, or call us at 800-445-7666 and we can get one shipped out to you, or consider this option on your next rack order.

Friday, June 14, 2013

How Many Rack-It Racks Can We Stack?




Because the Rack-It Truck Rack is a solid one-piece design, Rack-It takes special care in delivering the product to its distributors, each one carefully stacked and loaded to get to our customers in factory- new condition.  

We also use special care In the manufacturing process, welding each connection to assure maximum strength after its installed on the truck and used in service. Then special care is used to prepare and coat the rack to assure it lasts many years without needing re-coating.

So how many racks are stacked on this load?  Just enough to assure special care is used to get it to the final customer!



To find out more, you may call Rack-It truck racks at 800-445-7666.
Also find us at http://rackitinc.com/



Wednesday, June 12, 2013

The Ladder Pro Plus - Great to Carry Your Kayak!


 

There are many uses for a Rack-It Pro Plus rack and here is one - carry your kayak, safe and secure! 

Rack-It has expanded on our classic headboard. The Ladder Pro Plus includes both front and rear headboards, and left and right side clamp-on side rails to create a sturdy, fork lift loadable, cargo area rack with a removable rear bar. Side bars and rear headboard can be removed when the rack system is not required, leaving the front headboard in place for cab and/or rear window protection. Front headboard can be ordered with or without mesh. Fit is truck specific for most domestic and foreign made trucks. Hardware included.

Gusseted joints for added strength


FEATURES
• Modular design allows for 3 different rack configurations.
• Forklift Loadable.
• Rope hooks allow for quick and easy tie downs.
• Available with headboard mesh behind cab.
• Removable rear bar.
• Black powder coat finish.

To find out more, you may call Rack-It truck racks at 800-445-7666.
Also find us at http://rackitinc.com/

Monday, June 10, 2013

Safety Beacon Mount


The Safety Beacon Mount is a must for trucks used for road and highway maintenance and construction. Seven in. diameter, three hole mounting and wire access. Clamps on securely to all Rack-it truck racks and headboards. Gloss black powder coat finish. Hardware included.

Saturday, June 8, 2013

No Holes - No Drilling Required With the Mega Clamp System!


Gary Kank, Sales Manager of Rack-it Truck Racks, shows us the Mega Clamp System for attaching truck racks or headboards without drilling holes in the bed of the truck. This system holds the rack securely and is easily removed when needed.

Thursday, June 6, 2013

Ladder Pro Plus - Simple, Attractive and Functional



Unit can quickly be broken down
to its simplest form - a Standard or
Deluxe series headboard.

  
Ladder Pro Plus


Side bar easily mounts via
our added strength

By popular demand, Rack-it has expanded on our classic headboard. The Ladder Pro Plus includes both front and rear headboards, and left and right side clamp-on side rails to create a sturdy, fork lift loadable, cargo area rack with a removable rear bar. Side bars and rear headboard can be removed when the rack system is not required, leaving the front headboard in place for cab and/or rear window protection. Front headboard can be ordered with or without mesh. Fit is truck specific for most domestic and foreign made trucks. Hardware included.

Gusseted joints for added strength


FEATURES
• Modular design allows for 3 different rack configurations.
• Forklift Loadable.
• Rope hooks allow for quick and easy tie downs.
• Available with headboard mesh behind cab.
• Removable rear bar.
• Black powder coat finish.

Tuesday, June 4, 2013

Installation of the Rack-It Rack for the Toyota Tacoma



Robert Matzig, Production Manager for Rack-it Truck Racks, gives us a demonstration of how to install the Rack-it Truck Rack on the composite bed Toyota Tacoma pickup.

This is a unique product and the installation on the composite bed is somewhat different than a steel bed pickup. The video is very detailed shows the procedure as well.

See more about this product at http://rackitinc.com. 

Sunday, June 2, 2013

Rack-It All-Welded Design - Ready For Heavy Duty Work!


Rack-it Truck Racks are not only strong enough for service and utility bodies, but strong enough for heavy duty daily utility and construction work. This fleet of Ford F450/550 is ready for some tough service and because of the all-welded design utilizing schedule 10 HD steel pipe, they will prove to be strong and durable, and requiring no maintenance other than the occasional cleaning. The same cannot be said of some bolted together kit racks!

For more information, check out our redesigned and expanded website at http://www.rackitinc.com/, or call us at 800-445-7666.